HMAS Anzac |
|
Class overview | |
---|---|
Name: | Parker-class |
Builders: | Cammell Laird William Denny and Brothers |
Operators: | Royal Navy Royal Australian Navy |
Preceded by: | Marksman class destroyer leader |
Succeeded by: | Admiralty V class destroyer leader |
Built: | 1915—1917 |
In commission: | 1915—1935 |
Completed: | 6 |
Lost: | 1 |
Retired: | 5 |
General characteristics | |
Type: | destroyer flotilla leader |
Displacement: | 1,670 long tons (1,700 t) |
Length: | 325 ft (99 m) |
Beam: | 31 ft 9 in (9.68 m) |
Draught: | 10 ft 6 in (3.20 m) |
Propulsion: | Yarrow-type boilers, steam turbines, 3 shafts, 36,000 shp |
Speed: | 34 knots (63 km/h; 39 mph) |
Endurance: | 415 tons oil |
Complement: | 116 |
Armament: |
4 × QF 4-inch (101.6 mm) Mark IV guns, mounting P Mk. IX |
The Parker class leaders or Improved Marksman class leaders were a class of six destroyer leaders built for the Royal Navy during 1916-17 for World War I service. They were named after famed historical naval leaders, except for Anzac, which was named to honour the Australian and New Zealand Army Corps, and was later transferred to the Royal Australian Navy. They were the last major Royal Navy warships to be ordered with three propeller shafts, a design that was never widely adopted in British warships.
Contents |
The Parkers were based on the design of the preceding Marksman class leaders and shared the same hull design and dimensions. Operations with the Marksman class and previous leaders indicated several areas for improvement: more freeboard, increased firepower, and relocation of the bridge to a position further aft. on the Parker class, the bridge was moved aft by reducing the boiler rooms from three to two; instead of the four funnels on the Marksmans, the Parkers had three, with the foremost funnel thicker and taller to keep the bridge clear of smoke. This allowed a superfiring gun to be added on a shelter deck.[1] This crucial design change was to set the trend for future designs, as it allowed for two forward guns with unobstructed firing arcs, with the higher of the two guns still usable when heavy seas broke across the fo'c'sle. Anzac was the only ship of the class with increased freeboard, as the decision to do so was made after the construction began on the other ships.
Another design improvement over previous types was the adoption of director-controlled firing. Rather than allowing individual gun crews to lay and fire their guns, the firing solution was worked out on a central director table, supplied with target information by a sight and rangefinder carried on the bridge. Firing was directly commanded by the gunnery officer. This method improved accuracy, and was adopted as standard from the "V and W" destroyer class of 1917 onwards.
The first pair were ordered under the War Emergency Programme in February 1915; the first vessel was initially named Frobisher, but was renamed Parker before launch:
The next three ships were ordered in July 1915, and the last - Anzac - in December 1915:
|